Maelezo
5754 aluminum alloy sheet with moderate strength , nzuri ulikaji upinzani , weldability and ease of processing forming characteristics such as Al-Mg alloy typical alloys. At abroad, 5754 heat-treated aluminum plates of different states are main material used in in the automotive industry ( gari mlango , hufa , mihuri ) na sekta canning .
na safu nyembamba ya uso wa alumini ya usafi wa juu
5754 aluminum is widely used in welded structures , matenki ya kuhifadhia, vyombo shinikizo , marine structures and offshore facilities , transport tanks and for requiring excellent processing performance, bora ulikaji upinzani, high uchovu nguvu , weldability and high static strength of the medium occasions.
Aluminum surface
1, the surface does not allow cracks, corrosion spots and traces of nitrate .
2, allow the surface defect site where the depth does not exceed the nominal wall thickness of 8% from the size of the skin , mapovu, surface roughness and local super mechanical damage , but can not exceed the maximum depth of defects 0.5mm, the total area of the defect does not exceed the total area of the plate 5% .
3, allowing supply to the lighting along the longitudinal profile smooth surface .
4, Mahitaji mengine: demand-side and supply side to develop their own
Muundo wa kemikali
Si Si: 0.40;
Copper Cu: 0.10;
Mg Mg: 2.6 ~ 3.6
;Zinc Zn: 0.2;
Manganese Mn: 0.50;
Chromium Cr: 0.30;
Iron Fe: 0.40;
Al Al: margin .
Single: 0.05 .
Sifa za Mitambo
Tensile nguvu σb (MPA): 165 ~ 265.
Aluminum national standard (GB / T 3880-2006), uniform standards applicable to aluminum strip material.
Matibabu ya joto
1 ) homogenizing annealing : inapokanzwa 440 ℃; insulation 12 ~ 14h; air cooling.2 ) rapid thermal annealing : inapokanzwa 350 ~ 410 ℃; holding time 30 ~ 120min; air or water.3 ) high-temperature annealing : inapokanzwa 350 ~ 420 ℃; finished thickness ≥ 6mm or <6mm, the holding time of 2 ~ 10min or 10 ~ 30min; air cooling.4 ) Annealing: 250 ~ 300 ℃ heating or 150 ~ 180 ℃; holding time is 1 ~ 2h, baridi ya hewa.
5754 Aluminum available from stock
Aluminum sheet size:
unene : 3mm, 4mm, 6mm, 8mm
upana : 1000mm \ 1220mm \ 1500mm
Muda : 2000mm, 2440mm, 3000mm, 6000mm
Aluminum standard size : 1220 * 2440mm
-
-
-