Opis
RAYIWELL MFG / TOP Metal Manufacture can supply Fuel Tank aluminum Plate 5052 Aluminijasta tuljava, which belongs to the aluminum-magnesium alloy. According to the thickness, it can be divided into 5052 thin plate, 5052 medium and thick plate.
5052 aluminum alloy Plate belongs to the Al-Mg series alloy and has a wide range of applications, especially the construction industry is inseparable from this alloy. It is one of the most promising alloys. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. The main alloy element of 5052 aluminum alloy is magnesium, which has good formability, odpornost proti koroziji, varivost, and medium strength. It is used to manufacture aircraft fuel tanks, cevi, and sheet metal parts for transportation vehicles and ships, instruments, street lamp brackets and Rivets, hardware products, electrical-apparatus casings, etc.
5052 aluminum Coil is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Low plasticity when hardened, dobra odpornost proti koroziji, dobra varivost, slaba obdelovalnost, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets.
5052 aluminijasto ploščo in 6061 aluminum plate are our commonly used aluminum plates. The element of 5052 is magnesium, while the element of alloy 6061 contains silicon in addition to magnesium. Poleg tega, the processing state is different, except that the 6061 aluminum plate and the 5052 aluminum plate are both in the O temper, the 6061 aluminum plate is generally in the temper of T6 and T651, and the 5052 aluminum plate is generally in the temper of H112, H24, H32.
Mehanske lastnosti 5052 aluminum plate Tensile strength σb (MPa): ≤225 Elongation δ5 (%): ≥10 Mechanical properties of 6061 aluminum plate Tensile strength σb (MPa): ≥180 Yield point σ0.2 (MPa): ≥110 elongation Length δ5 (%): ≥14
The 5052 aluminum plate can be bent, and the 6061 aluminum plate has high hardness and is generally used for grinding tools. Both of them have good oxidation effect.
5052 aluminijaste plošče has a wide range of applications, has fatigue resistance, high plasticity and corrosion resistance, can not be strengthened by heat treatment, and has good plasticity, low cold working plasticity, dobra odpornost proti koroziji, dobra varivost, slaba obdelovalnost, and can be polished. 6061 aluminum plate has good corrosion resistance, weldability and good oxidation effect. Widely used in various industrial building parts that require certain strength and high corrosion resistance. 6061 aluminum plate is mainly used in places with high strength requirements, medtem 5052 aluminum plate is a kind of anti-rust aluminum alloy, which is mainly used in environments with anti-rust requirements.
5052 is an Al-Mg series anti-rust aluminum alloy, which cannot be strengthened by heat treatment. The chemical composition of this alloy is similar to that of 5A02 alloy, and its performance is basically the same as that of 5A02.
5052 aluminum alloy plate is used for parts that require good formability and corrosion resistance, high fatigue limit, dobra varivost, and medium static load, such as aircraft fuel and oil conduits, rezervoarji za gorivo, and various marine and land transportation equipment parts, cold stamping parts, sheet metal artifacts, street lamp posts; materials used as rivets or welding rods.
H32 and H112 are aluminum alloy tempers.
H32: Stabilized 1/4 hard temper after work hardening.
H112: Applicable to hot-formed products, the mechanical properties of this temper have specified requirements
The aluminum-magnesium alloy checker pattern plate is processed from 5000 series aluminum plate such as 5052, which has good processability, high hardness and excellent rust resistance. It is generally used in occasions that require corrosion resistance and load-bearing capacity, such as ship decks, anti-slip carriages, anti-slip stairs, etc. This kind of aluminum plate has high hardness and has a certain load-bearing capacity.
The five-bar non-slip patterned aluminum plate has become a willow-shaped patterned plate. It has good anti-skid ability and is widely used in the design of construction (nadstropje) platforme. Since the patterns on the surface of the aluminum plate are arranged in parallel according to five concave-convex patterns, and the angle between each pattern and other patterns is 60-80 degrees, this pattern has excellent anti-skid performance. This kind of aluminum plate is usually used as anti-slip in China, which has good anti-slip effect and is slightly cheaper.
Specifikacije za 5052 patterned aluminum plate:
debelina (mm)0.8-8.0
Premer (mm) 100-1850
dolžina (mm) 500-16000
The main purpose of the checkered aluminum plate is anti-slip and decoration. It is often used in special places such as cold storage, ladje, carriages, stopnice, itd; poleg tega, it is widely used in furniture, such as refrigerators, klimatske naprave, carriages, platforme, packaging pipes, screen skeletons, and various suspension beams. , table legs, decorative strips, handles, wiring troughs and covers, chair tubes, etc.
3003 5052 aluminij karirasti plošča
As aluminum coil factory in China, veselimo se oblikovanja uspešnih poslovnih odnosov z novimi strankami po vsem svetu v bližnji prihodnosti. Naša večna prizadevanja so odnos ,upoštevajte trg, upoštevajte navado, glej na znanost, in teorija o ,kakovost osnovnega, zaupajte prvemu, vodstvo pa naprednemu, za , zdaj se veselimo še večjega sodelovanja s tujimi strankami na podlagi vzajemnih koristi. Če vas zanima kateri od naših izdelkov, please feel free to contact us for more detail.
-
-
-