popis
Hliníková okrúhla tyč, nazývaná aj hliníková tyč, je jedným z najobľúbenejších a najuniverzálnejších hliníkových produktov vďaka svojej opracovateľnosti, trvanlivosť a mnoho rôznych aplikácií. Výrobky z hliníkových tyčí majú skvelý pomer pevnosti k hmotnosti a bežne sa vyskytujú v strojových častiach, architektúra, automobily a letectvo, a ako všetky hliníkové výrobky.
The aluminium round bar is used in a variety of decorative applications, a je mimoriadne obľúbený medzi architektonickými projektmi.
Aluminum round bar comes in a variety of sizes and specifications, čo určuje jej spoľahlivosť sú konkrétne aplikácie. Dá sa použiť na stavbu rámov, vnútorné vybavenie, rebríky, zábradlia a v iných projektoch interiérového dizajnu. Používajú sa aj na výrobu kovového nábytku, pneumatické inštalácie a iné rôzne zariadenia.
7075 Aluminum round bar is an aluminum-zinc alloy with 1%-8% zinc in addition to small amounts of magnesium and small quantities of copper and chromium. 7075 Round Bar alloy is precipitation hardened to very high strength levels. zliatina 7075 is used in airframe structures and other highly stressed components.
Hliníková okrúhla tyč
7075 is a cold-processed forged alloy with high strength, much better than mild steel. 7075 is one of the strongest alloys commercially available. General corrosion resistance, good mechanical properties and anodic reaction. Fine grains enable better deep drilling performance, enhanced tool wear resistance, and unique thread rolling
Ako celá hliníková kruhová tyč je pevná, pomer pevnosti k hmotnosti z neho robí dokonalú zliatinu a materiál pre letecký priemysel. Rámy, nosné systémy a komponenty na mnohých lietadlách sú vyrobené z okrúhlych tyčí, a dodatočná odolnosť proti korózii a vynikajúca odolnosť proti namáhaniu sú tiež dôležitými faktormi v tejto aplikácii.
Hliníkové okrúhle tyče, a widely used form of hliník are Round Bars and are found in many aluminium industry’s major markets where aluminium is used. Na balenie sa používajú hliníkové okrúhle tyče, hliníkové okrúhle tyče sa používajú na výrobu plechoviek.
|
Products name
|
Aluminium Rod or aluminum Round Bar
|
|||
|
Materiál
|
1000 2000 3000 4000 5000 6000 7000 8000atď.
|
|||
|
šírka
|
500-2000mm or as the customer’s request
|
|||
|
dĺžka
|
1-12meter
|
|||
|
povrch
|
Potiahnuté, Reliéfne,leštený, lesklý, Eloxované,atď
|
|||
|
technika
|
hot rolled/cold rolled
|
|||
7075 aluminum is called an ultra-high-strength aluminum alloy. The yield strength of the alloy is close to the tensile strength, the yield ratio is high, and the specific strength is also very high. Avšak, the plasticity and high-temperature strength are low, and it is suitable for use as a load-bearing structure at room temperature and below 120°C. parts, the alloy is easy to process, has good corrosion resistance and high toughness. This alloy is widely used in the aviation and aerospace fields and has become one of the most important structural materials in this field
Hliníková okrúhla tyč
Top 10 Applications of 7075 Aluminum Round Bars in Various Industries
1. Aerospace industry: 7075 round bars are widely used in the aerospace industry for manufacturing aircraft components, including fuselage frames, wing spars, and landing gear parts. The high strength-to-weight ratio of 7075 aluminum makes it ideal for these applications.
2. Automobilový priemysel: 7075 round bars are used in the automotive industry for various applications, such as manufacturing suspension components, hnacie hriadele, and engine parts. The high strength and corrosion resistance of 7075 aluminum make it suitable for these demanding applications.
3. Marine industry: 7075 round bars are used in the marine industry for manufacturing boat hulls, stožiarov, a ďalšie konštrukčné prvky. The high strength and resistance to saltwater corrosion make 7075 aluminum a preferred choice for marine applications.
4. Defense industry: 7075 round bars are extensively used in the defense industry for manufacturing military vehicles, zbrane, and equipment. The high strength and durability of 7075 aluminum make it suitable for these demanding applications.
5. Sports equipment: 7075 round bars are used in the manufacturing of sports equipment, such as bicycle frames, baseball bats, and golf club shafts. The lightweight and high strength characteristics of 7075 aluminum enhance the performance of these sports equipment.
6. Stavebný priemysel: 7075 round bars are used in the construction industry for manufacturing structural components, such as beams, columns, and scaffolding. The high strength and resistance to corrosion make 7075 aluminum a preferred choice for these applications.
7. Electrical industry: 7075 round bars are used in the electrical industry for manufacturing electrical connectors, bus bars, and heat sinks. The high thermal conductivity and electrical conductivity of 7075 aluminum make it suitable for these applications.
8. Medical industry: 7075 round bars are used in the medical industry for manufacturing surgical instruments, orthopedic implants, and prosthetics. The biocompatibility and high strength of 7075 aluminum make it suitable for these medical applications.
Dostupné hliníkový plech stupňa
1000 séria:1050,1060,1070,1080,1100,1145,1200,1235, atď.
2000 séria:2014,2017,2018,2024,2025,2219, 2219,2618atď.
3000 séria:3003,3004,3102,3104,3105,3005, atď.
4000 séria:4032,4043, 4017, atď
5000 séria: 5005,5052,5454,5754,5083,5086,5182,5082, atď.
6000 séria:6061,6063,6262,6101, atď
7000 séria:7072,7075,7003 atď
8000 séria: 8011, atď.
Špecifikácia: ASTM B221, B211, B565, B316, AMS 4121 2014
štandardné: ASTHMA, AKO JA, AMS, GB / T, JIS
zlosť: O, H12, H14, H16, H18, H22, H24, H26, H32, H112
dĺžka: 100 mm To 3000 Dĺžka mm & Vyššie
veľkosť: 5 mm To 500 mm
Priemer: 0.1-600mm
MOQ: 5tona na veľkosť
povrch: čisté a hladké, žiadna svetlá škvrna, korózia, oleja, Perforovaný hliníkový plech, atď.
Dodacia lehota: asi 30 dní po prijatí zálohy
platba: T/T, L/C na dohľad
Obchodné podmienky: FOB, CIF, CFR
-
-
-