popis
6061 aluminum plate is a heat-treated reinforced alloy sheet with good formability, zvariteľnosť, machinability, and moderate strength, which can maintain good operability after annealing.
Magnesium-aluminum 6061-T651 is the main alloy of the 6-series alloy, and it is a high-quality aluminum alloy product that has undergone heat treatment and pre-stretching. Má vynikajúce vlastnosti, ako je ľahké farbenie filmu a vynikajúci oxidačný účinok.
6061 hliníkový plech is Widely used in various industrial structural parts that require a certain strength and high corrosion resistance, ako je výroba nákladných áut, vežové budovy, lode, električky, railway vehicles.
6061 hliníková zliatina is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Jeho sila sa síce nedá porovnať so sériou 2XXX alebo sériou 7XXX, jeho zliatiny horčíka a kremíka majú mnoho vlastností, vynikajúci výkon spracovania a vynikajúce zváracie vlastnosti. A galvanické pokovovanie, dobrá odolnosť proti korózii, vysoká húževnatosť a žiadna deformácia po spracovaní, hustý materiál bez defektov a ľahko sa leští, ľahko zafarbiteľný film, vynikajúci oxidačný účinok a ďalšie vynikajúce vlastnosti.
The main alloying elements of 6061 zliatiny hliníka sú horčík a kremík, and form Mg2Si. If it contains a certain amount of manganese and chromium, it can neutralize the bad effects of iron; sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; there is still a small amount of conductive material. copper to offset the adverse effects of titanium and iron on electrical conductivity; zirconium or titanium can refine grains and control recrystallization; in order to improve machinability, lead and bismuth can be added. Mg2Si is solid-dissolved in aluminum, which makes the alloy have artificial aging hardening function. Hlavné legujúce prvky v 6061 zliatiny hliníka sú horčík a kremík, ktoré majú strednú pevnosť, dobrá odolnosť proti korózii, zvariteľnosť, a dobrý oxidačný účinok.
The general purpose 6061 hliník Plate is heat treatable, resists cracking due to stress, and is easy to weld and machine, but limited on formability.
6061 Aluminum plate is ideal for structural framing, base plates, gussetts, lietadlo, marine and automotive parts, atď
Pretože 6061 aluminium alloy is easy to extrude, it can provide a variety of product forms such as sheet, strip, tanier, tyč, výkovky, skúmavky, potrubia, drôty, extruded parts and structural shapes. hliník 6061 has good corrosion resistance, mechanical properties, tvárnosť, zvariteľnosť, and machinability.
It belongs to 6000 séria (Al-Mg-Si) alloy aluminum sheet and has good weldability. V rovnakom čase, 6061 aluminum coil sheet has excellent aluminum-magnesium composition ratio and strong corrosion resistance. The hardness is 95HB (Brinell), easy to process and form, non-stick knife
6061 Aluminium Aging 6061 aluminium alloy sheets, dosky, rolled or cold-rolled wire, tyče, tyče, and drawn tubing are aged to a metal temperature of 160 °C (320 °F) and maintaining it for 18h. Extruded rods, tyče, shapes and tubes; dies and hand forgings, rolled rings are aged to a metal temperature of 175 °C (345 °F) and held for 8 hodiny
zlosť: T1,T2,T3, T4, T6, T651
hrúbka:0.2-350mm
šírka:30-2600mm
dĺžka:200-11000mm
Materská cievka: CC alebo DC
závažia: Približne 2 mt na paletu pre všeobecnú veľkosť
MOQ: 5-10tona na veľkosť
Ochrana: papierová medzivrstva, biely film, modrý film, čiernobiely film, mikro viazaný film, podľa Vašej požiadavky.
povrch: čisté a hladké, žiadna svetlá škvrna, korózia, oleja, Perforovaný hliníkový plech, atď.
Štandardný produkt: GBT3880, 4000 JIS, EN485, ASTM-B209, EN573
Dodacia lehota: asi 30 dní po prijatí zálohy
platba: T/T, L/C na dohľad
Obchodné podmienky: FOB, CIF, CFR
The 6061 alloy is one of the most common for extrusion, but you may be considering other options for your particular application. Below are some other common alloys that are often considered as alternatives.
6061 a 6063 are the two most popular extrusion alloys. 6063 aluminum occupies the number one spot and 6061 occupies spot number two. As alloys in the 6000 séria, they both have magnesium and silicon as their primary alloying elements. teda, they have many similar properties. 6061 offers higher strength, však. Ako taký, it is often used for more structural applications. 6063, na druhej strane, is used for applications such as railing or trim, windows, and doors, due to its better appearance and corrosion resistance.
Páči sa mi to 6061, 5052 aluminum has magnesium as a primary alloying element. In the case of 5052, it is the only primary alloying element. 6061 has silicon as well. One of the key benefits of this alloy is its high level of weldability compared to other alloys. For projects where weldability is key, it is worth considering. One downside to 5052, though, is that it is not heat treatable. It is good for a variety of welding applications and it works well in marine applications due to its high corrosion resistance.
Primarily used in aerospace applications, a 2024 alloy is known for high strength. Its main alloying element is copper, and although it is strong and has good fatigue resistance, it is less machinable and more difficult to weld than 6061. It also offers poor corrosion resistance and is often used in wing and fuselage structures which come under high tension.
A member of the 6000 séria, 6061 aluminum’s main alloying elements are magnesium and silicon, and it’s a great example of a jack of all trades. The alloy is somewhat universal, seeing some exposure in structural and building products as well as the aerospace and recreation industries.
zliatina 6061 aluminum plate displays good tensile strength, which can be improved by temper treatment, and good corrosion resistance, zvariteľnosť, and workability. Its workability makes it the right choice for many extrusion projects, as it is easy to form.
The alloy is widely available at a relatively low cost and is a great option to produce varied and precise components in different shapes. Although alloy 6061 doesn’t rank first in any aluminum properties tier list, it’s a great and reliable all-around aluminum alloy to work with.
-
-
-