Penerangan
6061 aluminum coil made in China is a heat-treated reinforced alloy sheet with good formability, kebolehkimpalan, machinability, and moderate strength, which can maintain good operability after annealing.
Magnesium-aluminum 6061-T651 is the main alloy of the 6-series alloy, and it is a high-quality aluminum alloy product that has undergone heat treatment and pre-stretching. It has excellent characteristics such as easy coloring film and excellent oxidation effect.
6061 gegelung aluminium is Widely used in various industrial structural parts that require a certain strength and high corrosion resistance, such as manufacturing trucks, tower buildings, kapal, trams, railway vehicles.
6061 aloi aluminium is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength cannot be compared with 2XXX series or 7XXX series, its magnesium and silicon alloys have many characteristics, excellent processing performance and excellent welding characteristics. And electroplating, ketahanan kakisan yang baik, high toughness and no deformation after processing, dense material without defects and easy to polish, easy to color film, excellent oxidation effect and other excellent characteristics.
The main alloying elements of 6061 aluminum alloy are magnesium and silicon, and form Mg2Si. If it contains a certain amount of manganese and chromium, it can neutralize the bad effects of iron; sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; there is still a small amount of conductive material. copper to offset the adverse effects of titanium and iron on electrical conductivity; zirconium or titanium can refine grains and control recrystallization; in order to improve machinability, lead and bismuth can be added. Mg2Si is solid-dissolved in aluminum, which makes the alloy have artificial aging hardening function. The main alloying elements in 6061 aluminum alloy are magnesium and silicon, which have medium strength, ketahanan kakisan yang baik, kebolehkimpalan, and good oxidation effect.
The general purpose 6061 Gegelung aluminium is heat treatable, resists cracking due to stress, and is easy to weld and machine, but limited on formability. 6061 Aluminum coil and aluminum Plate are ideal for structural framing, base plates, gussetts, kapal terbang, marine and automotive parts, dan lain-lain
Because 6061 aluminium alloy is easy to extrude, it can provide a variety of product forms such as sheet, strip, plat, batang, penempaan, tiub, paip, wayar, extruded parts and structural shapes. aluminium 6061 has good corrosion resistance, mechanical properties, kebolehbentukan, kebolehkimpalan, and machinability.
It belongs to 6000 siri (Al-Mg-Si) alloy aluminum sheet and has good weldability. Pada masa yang sama, 6061 aluminum coil sheet has excellent aluminum-magnesium composition ratio and strong corrosion resistance. The hardness is 95HB (Brinell), easy to process and form, non-stick knife
6061 Aluminium Aging 6061 aluminium alloy sheets, plat, rolled or cold-rolled wire, batang, bar, and drawn tubing are aged to a metal temperature of 160 °C (320 °F) and maintaining it for 18h. Extruded rods, batang, shapes and tubes; dies and hand forgings, rolled rings are aged to a metal temperature of 175 °C (345 °F) and held for 8 Jam
Temper: T1,T2,T3, T4, T6, T651
ketebalan:0.2-350mm
lebar:30-2600mm
Negara:200-11000mm
gegelung ibu: CC atau DC
Berat: Kira-kira 2mt setiap palet untuk saiz umum
MOQ: 5-10tan setiap saiz
Perlindungan: kertas antara lapisan, filem putih, filem biru, filem hitam putih, filem terikat mikro, mengikut keperluan anda.
permukaan: bersih dan licin, tiada bintik terang, kakisan, minyak, berlubang, dan lain-lain.
Produk standard: GBT3880, JIS4000, EN485, ASTM-B209, EN573
Masa penghantaran: kira-kira 30 hari selepas menerima deposit
pembayaran: T/T, L/C pada pandangan
Terma dagangan: FOB, CIF, CFR
yang 6061 alloy is one of the most common for extrusion, but you may be considering other options for your particular application. Below are some other common alloys that are often considered as alternatives.
6061 dan 6063 are the two most popular extrusion alloys. 6063 aluminum occupies the number one spot and 6061 occupies spot number two. As alloys in the 6000 siri, they both have magnesium and silicon as their primary alloying elements. Oleh itu, they have many similar properties. 6061 offers higher strength, however. Seperti, it is often used for more structural applications. 6063, selain itu, is used for applications such as railing or trim, windows, and doors, due to its better appearance and corrosion resistance.
Suka 6061, 5052 aluminum has magnesium as a primary alloying element. In the case of 5052, it is the only primary alloying element. 6061 has silicon as well. One of the key benefits of this alloy is its high level of weldability compared to other alloys. For projects where weldability is key, it is worth considering. One downside to 5052, though, is that it is not heat treatable. It is good for a variety of welding applications and it works well in marine applications due to its high corrosion resistance.
Primarily used in aerospace applications, yang 2024 alloy is known for high strength. Its main alloying element is copper, and although it is strong and has good fatigue resistance, it is less machinable and more difficult to weld than 6061. It also offers poor corrosion resistance and is often used in wing and fuselage structures which come under high tension.
A member of the 6000 siri, 6061 aluminum’s main alloying elements are magnesium and silicon, and it’s a great example of a jack of all trades. The alloy is somewhat universal, seeing some exposure in structural and building products as well as the aerospace and recreation industries.
aloi 6061 displays good tensile strength, which can be improved by temper treatment, and good corrosion resistance, kebolehkimpalan, dan kebolehkerjaan. Its workability makes it the right choice for many extrusion projects, as it is easy to form.
The alloy is widely available at a relatively low cost and is a great option to produce varied and precise components in different shapes. Although alloy 6061 doesn’t rank first in any aluminum properties tier list, it’s a great and reliable all-around aluminum alloy to work with.
-
-
-