La description
le 5052 aluminum coil is an AL-Mg alloy aluminum plate. Magnesium is the main alloying element in the 5052 plaque d'alliage d'aluminium. It is the most widely used anti-rust aluminum. Cet alliage a une haute résistance, notamment la résistance à la fatigue: plasticity and corrosion resistance High toughness, can not be strengthened by heat treatment, bonne plasticité en écrouissage à mi-froid, faible plasticité lors de l'écrouissage à froid, bonne résistance à la corrosion, bonne soudabilité, poor machinability, and can be polished. Aluminum-magnesium alloys also contain a small amount of manganese, chrome, beryllium, titane, etc. Except for a small amount of solid solution, most of the manganese in the alloy forms MnAl6. The role of chromium in 5052 aluminum plate is similar to that of manganese, which can improve the resistance to stress corrosion cracking, improve the strength of base metal and weld, and reduce the tendency of welding cracks, but its content generally does not exceed 0.35%.
5000 series aluminum alloys represent 5052, 5005, 5083, 5A05 series. 5000 Les tiges en aluminium de la série appartiennent à la série de plaques d'aluminium en alliage les plus couramment utilisées, l'élément principal est le magnésium, et la teneur en magnésium est comprise entre 3-5%. Il peut également être appelé alliage aluminium-magnésium. Les principales caractéristiques sont une faible densité, haute résistance à la traction, high elongation, and good fatigue strength, but it cannot be strengthened by heat treatment. Under the same area, le poids de l'alliage aluminium-magnésium est inférieur à celui des autres séries. Il est également largement utilisé dans les industries conventionnelles.
le 5052 plaque d'aluminium has medium strength, bonne formabilité, corrosion resistance and weldability, and high fatigue resistance. It is a commonly used high-grade anti-rust aluminum. 5052 alloy aluminum sheet is widely used in the automotive industry, generally used in automotive fuel tanks, tuyaux d'huile, conduits, low-load parts, etc., and can also be used in the production of various liquid containers
le 5083 plaque d'aluminium ou enroulement en aluminium has a high magnesium content and belongs to a high-magnesium alloy. Il ne peut pas être renforcé par traitement thermique, has good strength and corrosion resistance, bonne usinabilité, can be welded, and can be anodized. 5083 alloy aluminum plate can be used in shipbuilding, automobiles, pièces de soudage pour avions, subway light rail, récipients sous pression qui nécessitent une protection incendie stricte (comme les camions-citernes pour liquides, refrigerated vehicles, conteneurs réfrigérés), appareils de réfrigération, Tours de télévision, équipement de forage, équipement de transport, missiles Parts, Armor, etc.
La teneur en magnésium de 5754 aluminum plate is higher than that of 5052 aluminum plate and lower than that of 5083 plaque d'aluminium. It has high fatigue resistance, good corrosion resistance and good weldability. Seals and other parts can also be used to manufacture pressure vessels, ships and transport tanks, etc.
Chemical Composition of 5052 Bobine d'aluminium
| Elements | et | avec | mg | Zn | mn | Cr | Fe | Autre | Al |
| Contents | 0.25 | 0.1 | 2.2-2.8 | 0.10 | 0.10 | 0.15-0.35 | 0.4 | 0.15 | rests |
| Tempérer | F, la, H14, H16, H18, H19, H22, H24, H26, H28 |
| Épaisseur (mm) | 0.2-350 |
| Largeur (mm) | 40-2600 |
| Longueur (mm) | Personnalisé |
| Applications typiques | Silo, flange material, GIS shell, Voiture, Autobus, trunk board, Marin, petrochemical equipment, and components |
5052 aluminum plate is a conventional anti-rust aluminum alloy plate, which is divided into 5052 thin plate, 5052 medium and thick plate, 5052 thick plate according to the specification, 5052-O state aluminum plate, 5052-H112 aluminum plate, 5052-H32 aluminum plate, 5052-H34 aluminum plate, the above is the commonly used 5052 aluminum plate state.
5052 aluminum sheet is widely used in fields such as ships, machinerie, appareils électroniques, produits chimiques, matériaux de construction, decoration and other fields due to its good mechanical properties, cutting properties, and anodizing properties.
5052-H32 is the most commonly used state of 5052 plaque d'aluminium. H32 represents the processing condition of the product. H can be understood as incomplete annealing and work hardening. The hardness is too soft, and it has been properly work hardened. 32 represents that the modified product has been stabilized and the hardness is 1/4 dureté
China aluminum coil supplier RAYWELL Fabricant / L'aluminium RuiYi peut offrir 1050 1100 2024 3003 4017 5052 6061 7075 aluminum sheet in custom sizes and patterns with cheaper price but high quality.
-
-
-